Description
Purpose: for interior use
Binder: pure acrylic dispersion
Solvent: water
Colour: white or tinted by colour cards
Density: 1,26-1,28 g/cm³
pH: 8,0-9,0
Volatile organic compounds (VOC): <30 g/l EN ISO 11890-2
Formaldehyde concentration in the tare: VdL-RL 03: 12 ppm or (12×10-4) %
Non-volatile-matter content by volume: ~37,0 %
Classification by maximum grain size: fine (to 100 μm) EN 13300
Degree of gloss, 60⁰/85⁰: <60/≥10 (semi-matt) EN 13300
The loss of thickness of the coat (after 200 scrubs): <5 µm EN ISO 11998; Class 1 for wet-scrub resistance according to EN 13300
Hiding power: hiding power class 1, with a spreading rate of 6 m2/l EN ISO 6504-3 A method
Resistance to liquids (LST EN ISO 2812-1): after 24 hours there are no changes EN ISO 4628-1; EN ISO 4628-2
Work tools: brush, roller, paint spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity. Avoid drafts and direct sunlight during painting. Failure to follow these recommendations may form poor-quality paint film.
Coverage rate: 6-7 m2/l, applied in 2 layers
Drying time (23 °C, 50 % RH): dust does not stick after 1 hour. Repainting can be done only after the first layer is completely dry (after ~2-4 hours), depending on the surface, layer thickness, air temperature, humidity, etc.
Surface Preparation
The surface must be stable, dry and clean.
Unpainted surfaces: remove the mud, grease, and salts. Prime porous and moisture-absorbing surfaces primed with IGIS AG deep primer. Level uneven surfaces and various cracks with the selected IGIS filler, sand and remove the dust.
Previously painted surfaces: remove the old peeling paint coating, wash the contaminated surface with soapy water or a 3 % solution of soda, and then rinse with clean water. Sand and dust off a glossy painted surface to improve adhesion. Treat the surface affected by fungi and mould with an anti-mold agent. Level uneven surfaces and various cracks with the selected IGIS filler, sand and remove the dust. Prime filled surfaces with primer before painting.
Use IGIS primer paint to even out the color of surface.
Application
Stir well before use. Apply 1-2 layers. Paint of the same batch shall be used to cover one surface. Stir them in one tare to ensure colour uniformity.
Paint large areas without interruption in the same direction throughout the wall. An even, high-quality coating is obtained by abundantly soaking the roller in the paint. Make sure there is enough paint on the roller during painting.
Maintenance
The surface film acquires full strength and can be cleaned after 28 days. Clean dirty painted surfaces with clean lukewarm water and a soft cloth or sponge. Hot water can soften the paint film. We recommend cleaning with mild alkaline cleaner (pH 6-8). Cleaners containing organic solvents are not suitable. Do not use abrasive cleaners such as rough sponges or brushes.
Precautionary statements: keep out of reach of children, avoid release to the environment, and wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.
Shelf life in tightly closed original packaging: 24 months from the date of manufacture
Storage and transportation conditions: store the product tightly closed in a dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against damage, frost and direct sunlight.
Waste management
Do not pour into drains, water or soil. Empty, dry product packages should be recycled or disposed of in accordance with national law.
Packing: 1 l, 3 l, 10 l buckets
Additional information
| Liter | 1 L, 3 L, 10 L |
|---|
There are no question found.
Rating & Review
There are no reviews yet.