Paint SPALVA

Description

Matt wall paint SPALVA 
For interior walls and ceilings made from mineral building materials (plaster, drywall
panels, coated surfaces, painted wallpaper, brick masonry, concrete, etc.).Perfect for
walls and ceilings in residential and public areas.

• Water-based
•  Good coverage and leveling
•  Resistant to disinfecting agents
•  Good adhesion to the surface
•  Forms a vapor permeable layer
•  Enviroment and health friendly

Use
Matt water-based acrylic copolymer paint for interior use. For interior walls and
ceilings made of mineral construction materials (plaster, plasterboard, filled
surfaces, wallpaper, brick masonry, concrete, etc.).4
Coverage rate
5-7 m²/l applied in 2 layers. The exact coverage rate is determined by covering the
test area.

Purpose: for interior use
Binder: acrylic copolymer
Solvent: water
Color: white or tinted by color cards
Density: 1,320-1,340 g/cm³
pH: 8,0-9,0
Volatile organic compounds (VOC): <2 g/l EN ISO 11890-2
Non-volatile-matter content by volume: ~32,0 %
Classification by maximum grain size: fine (to 100 μm) EN 13300+AC
Degree of gloss, 85⁰: <10 (matt) EN 13300+AC
The loss of thickness of the coat (after 200 scrubs): ≥5 and <20 µm EN ISO
11998; Class 2 for wet-scrub resistance according to EN 13300+AC
Resistance to liquids (LST EN ISO 2812-1): after 24 hours there are no changes
EN ISO 4628-1; EN ISO 4628-2
Work tools: brush, roller, paint spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25°C and 35–80 % relative humidity. Avoid
drafts and direct sunlight during painting. Failure to follow these recommendations,
may form poor-quality paint film.
Coverage rate: 5-7 m²/l, applied in 2 layers. The exact coverage rate is determined
by covering the test area.
Drying time (23 °C, 50 % RH): dust does not stick after 1 hour. Repainting can be
done only after the first layer is completely dry (after ~2-4 hours), depending on
surface, layer thickness, air temperature, humidity, etc.
Surface preparation
The surface must be stable, dry and clean.
Unpainted surfaces: remove the mud, grease, salts. Prime porous and moisture-absorbing surfaces with IGIS AG or Taktika P deep primer. Level uneven surfaces
and various cracks with the selected IGIS filler, sand and remove the dust.
Previously painted surfaces: remove the old peeling paint coating, wash the
contaminated surface with soapy water or 3 % solution of soda, then rinse with clean
water. Sand and dust off a glossy painted surface to improve adhesion. Treat the
surface affected by fungi and mold with an anti-mold agent. Level uneven surfaces
and various cracks with the selected IGIS filler, sand and remove the dust. Prime
filled surfaces with primer before painting.
Use IGIS GD primer paint to even out the colour of surface.
Application
Stir well before use. Apply 1-2 layers. Paint of the same batch shall be used to cover
one surface. Stir them in one tare to ensure color uniformity.
Paint large areas without interruption in the same direction throughout the wall. An
even, high-quality coating is obtained by abundantly soaking the roller in the paint.
Make sure there is enough paint on the roller during painting.
Maintenance
The surface film acquires full strength and can be cleaned after 28 days. Clean dirty
painted surface with clean lukewarm water and a soft cloth or sponge. Hot water can
soften the paint film. We recommend to clean with a mild alkaline cleaners (pH 6-8).
Cleaners containing organic solvents are not suitable. Do not use abrasive cleaners
such as rough sponges or brushes.
Precautionary statements: keep out of reach of children, avoid release to the
environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse
cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
Additional hazard information: EUH208 –contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H)-one can cause allergy in humans.
Shelf life in tightly closed original packaging: 24 months from the date of
manufacture
Storage and transportation conditions: store the product tightly closed in dry well – ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.
Waste management: do not pour into drains, water or soil. Empty, dry product
package should be recycled or disposed of in accordance with national law.
Packing: 1 l, 3 l, 10 l buckets