IGIS TAKTIKA G

Description

Universal filler TAKTIKA G

• One product for almost all finishing applications
• Up to 3 times faster process
• Water-based
• Ready to use in a variety of applications
• Extremely easy to apply and smooth up to 2 mm thick layer
• Excellent vapour permeability, no cracking, elastic
• Brightens when drying
• Low water absorption ensures lower paint consumption
• Less dust
• Lightweight, convenient to use and transport
• Environment and health-friendly

Use

For levelling concrete, plasterboard, plaster and other mineral surface before water-based paints and wallpaper. Perfect for finishing corners, and AK-type plasterboard joints.
The multipurpose filler TAKTIKA G is suitable for manual application and TAKTIKA GM for spraying or rolling.
Recommended for both initial (on rough surfaces) and final smoothing applications.

Coverage rate

1 m²/l for 1 mm thick layer. Maximum thickness of one layer – 2 mm.

Technical data

Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite, perlite, microspheres
Solvent: water
Colour: grey (brightens when drying)
Density: 1,12-1,25 g/cm³ EN ISO 2811-1
Particle size: ≤0,15 mm, max. 0,2 mm
pH: 8,0-9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
Volatile organic compounds (VOC): <1 g/l EN ISO 11890-2
Formaldehyde concentration in filler: VdL-RL 03: 5 ppm or (5,3×10^-4) %
Non–volatile–matter content: 57,0-59,0 % EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: MPa ≥0,3 EN 1542
Non-existence cracks: no cracks EN 13963

Work tools: spatula, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 ⁰C to +25 ⁰C and 35–80 % relative humidity
Coating thickness: 2 mm
Coverage rate: 1 m²/l for 1 mm thick layer
Drying time (23 °C, 50 % RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on the surface, layer thickness, air temperature and humidity, etc.

Surface Preparation
The surface must be dry, capable of withstanding loads, stable and clean. Prime highly or unevenly absorbent surfaces with deep primer IGIS AG.

Filling
Stir well before use. Fill the joints of AK-type gypsum boards with filler, press the joint tape immediately and leave to dry. Other types of joints shall be filled with joint filler IGIS T. Smoothing layer may be applied only when the joints are completely dry. The second layer may be applied when the first layer is dried. Before painting sand the filled surface and remove the dust.

Precautionary statements: keep out of reach of children, avoid release to the environment, and wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Waste management
Do not pour into drains, water or soil. Empty, dry product packages should be recycled or disposed of in accordance with national law.

Shelf life in tightly closed original packaging: 1 year from the date of manufacture

Storage and transportation conditions: store the product tightly closed in a dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against damage, frost and direct sunlight.

Packing: 
TAKTIKA G
3 l, 10 l buckets, 17 l bags
TAKTIKA GM
17 l bags